1 · The 60-second answer

A phone call is not a voice travelling through wires. It is a routed signal. Your phone digitises the audio, packetises it, hands it to the nearest cell tower, which forwards it through your carrier's core network. The core looks up where the other phone currently lives, asks a global signaling network to set up a path to that carrier, and the destination side does the same thing in reverse.

The simplest mental model: phone → tower → core network → signaling backbone (SS7 or Diameter) → destination core → destination tower → other phone. Six hops, billions of times a day, in under 300 milliseconds.

I walk through every hop below. I leave out jargon you do not need and use plain analogies where they help. By the end, eSIM, roaming, and why your number still works in Tokyo should read as obvious instead of magical.

2 · The journey of a single phone call

You tap call. Here is what happens, in the order I read it in the standards:

  1. Your phone wakes the radio. The modem inside your phone tunes to the nearest cell tower it has already been authenticated against, and sends a setup request over the air.
  2. The tower forwards it. The base station (the box at the foot of the tower, not the antennas) sends the request down a fiber or microwave link to your carrier's core network.
  3. The core looks you up. Your carrier's subscriber database confirms who you are, what plan you have, and whether you're allowed to place this call.
  4. The core looks them up. Your carrier queries a global signaling network (SS7 on older networks, Diameter on 4G, HTTP/2 on 5G) for the routing record of the number you dialled.
  5. A path is set up. The two carriers negotiate a media path. On modern networks that path carries Voice-over-LTE or Voice-over-NR packets: IP packets, like everything else.
  6. The destination phone rings. The other carrier pages its subscriber, the recipient's phone wakes up, the call is established.
  7. Audio flows. Each phone digitises microphone audio, encodes it (EVS on 4G/5G, AMR on older networks), and sends ~50 small packets per second along the negotiated path.

End-to-end latency is typically 150 to 300 ms. Most of it is the radio link, not the long-distance bit. The signal can travel halfway around the world over fiber in under 80 ms.

3 · What's actually inside a "tower"

"Cell tower" is a casual word for three distinct pieces of equipment, often all in one place. I use the engineers' name for the collection, the Radio Access Network (RAN).

Cities have more towers because each tower can only handle a few hundred simultaneous active connections, not because they need bigger coverage. A square kilometre of central Manhattan might have fifty separate cells stacked vertically (different floors of different buildings) where a rural county has one tower covering 30 km².

This is also why 5G needed millimeter-wave bands. The high frequencies don't travel far and don't penetrate walls, so carriers had to build "small cells" the size of a shoebox onto streetlights and bus shelters. Coverage is traded for capacity.

4 · The core network

If the RAN is the last mile, the core network is the carrier's nervous system. It decides who you are, what you can do, and where your traffic goes next. I count four pieces that matter for understanding how a call gets routed.

I would keep two things from this section. First, the subscriber database (HLR/HSS) is the single source of truth for who you are. Every roaming partner, every interconnect carrier, eventually pings your home HSS to confirm your line is real. Second, "the core" used to be a room full of beige hardware; on 5G it is a fleet of virtual machines or containers, often running on commodity servers in a regional data centre.

5 · SS7 and Diameter: the global signaling networks

Carriers talk to each other constantly. They have to: every roaming charge, every cross-network call, every SMS to a number on a different operator, every "is this person still on your network or did they port out?" lookup. The protocol they use to talk is called a signaling network.

The analogy I find most useful: signaling is the post office's address-routing system, not the letters themselves. Letters (your voice, your texts, your data) travel on a separate path. The signaling network is what decides where to send them.

SS7 still matters in 2026 because of interconnect. Even a brand-new 5G network has to talk to a 2G network somewhere in the world if it wants to terminate a call to that country. So every modern carrier runs gateways that translate Diameter/HTTP-API requests back to SS7 messages for legacy partners, and forward SS7 queries the other way.

6 · How your number actually gets routed

Every phone number on the planet follows a single international format defined by ITU-T E.164: country code, then a national destination code, then a subscriber number. A UK mobile looks like +44 7700 900123; a New York number like +1 212 555 0144. Maximum 15 digits.

Originally the country code told the world which country a number belonged to and the area code told you which exchange owned it. That meant the destination was implicit in the digits. Then portability arrived and broke that assumption.

Local Number Portability (LNP) lets you take your number with you when you switch carriers. The number stays the same; what changes is the routing record. To make this work, every market that supports portability runs a database that maps the dialled number to a Location Routing Number (LRN), a hidden number identifying the carrier that currently owns the line.

So when your carrier looks up a number to set up a call, it does this:

  1. Strip the dialled digits to the country level. Country code +44 → UK databases. +1 → North American Numbering Plan databases.
  2. Query the portability database. "Does this number's prefix imply its carrier, or has it been ported?" In the US the database is called the NPAC; in the UK, individual carriers maintain their own copies of the central porting database; in most EU countries, a regulator-mandated central database holds the record.
  3. Get the LRN. The query returns the routing number of the carrier that currently owns the line, regardless of which one originally issued it.
  4. Forward the call via SS7 or Diameter to that carrier's core, which pages the subscriber and rings the phone.

It's a single database lookup per call, completed in tens of milliseconds, and it's the reason a number you got from Verizon in 2008 can be answered today on a SIM card connected to a tower owned by Vodafone in Spain.

7 · 2G → 3G → 4G → 5G · What actually changed

Every "G" is a new generation of radio access standards published by the 3GPP (the global mobile standards body). Each generation is a complete rewrite of how phones and towers talk: different frequencies, different modulation, different protocols, different core network design.

Here is the summary I find useful, side by side. The table scrolls sideways on phones, because there is a lot in it.

Swipe to compare →

Plan2G (GSM)3G (UMTS)4G (LTE)5G (NR)
Standardised1991200120092019
Voice carried asCircuit-switched audioCircuit-switched audioVoLTE (IP packets)VoNR (IP packets)
Data peak0.1 Mbps (EDGE)14 Mbps (HSPA+)300 Mbps (LTE-A)Up to 10 Gbps (mmWave)
Typical latency500 ms+100–300 ms30–50 ms1–10 ms (URLLC)
Core signalingSS7SS7DiameterHTTP/2 SBA
SIM/IMSI authGSM A3/A8Mutual auth (USIM)EPS-AKA5G-AKA + SUPI/SUCI
Defining capabilitySMS, voiceMobile data, video callsStreaming, real appsIoT, edge, network slicing

The cleanest break was 2G → 3G: 2G was designed for voice with data bolted on; 3G was designed for both from the start. The cleanest jump in user experience was 3G → 4G: latency dropped by an order of magnitude, which is what made the modern smartphone era work (Uber and Spotify both launched in the 4G window for a reason).

I read 5G not as "faster 4G" but as "a software-defined network that can be sliced for different use cases." The headline gigabit-speed mmWave demos are a small slice of what 5G actually is. What I would call the bigger deal is the core network rewrite: control plane and user plane are separated, network functions are containers, and operators can carve out dedicated "slices" for different traffic types (emergency services, factory automation, consumer video) on the same physical infrastructure.

8 · eSIM, technically

A physical SIM is two things in one: a tamper-resistant chip and a fixed identity (your IMSI, International Mobile Subscriber Identity) burned onto that chip at the factory by your carrier. To change carriers, you change the chip.

An eSIM separates those two ideas. The chip is now soldered into the phone itself: an eUICC (embedded Universal Integrated Circuit Card). The carrier identity is no longer baked in; it's a profile downloaded over the air from the carrier's SM-DP+ (Subscription Manager Data Preparation) server.

When you scan a QR code to activate an eSIM, the QR is a pointer to that SM-DP+ server. Your phone makes an authenticated request, the server checks the activation code, and a signed profile package is downloaded onto the eUICC. The profile contains the same things a physical SIM would (IMSI, authentication keys, network operator settings), just in software form, sealed inside the secure enclave on the chip.

Three consequences fall out of this design:

  • Multiple lines on one chip. A modern eUICC holds 5 to 10 profiles simultaneously. You can have an iPhone with a US line, a UK line, and a travel eSIM all installed, and switch between them in Settings.
  • Activation in seconds, anywhere. Because the profile is downloaded, you don't need to be physically present at a carrier store, in your home country, or anywhere near a SIM card. You need a network connection (your existing data, or Wi-Fi) and the QR code.
  • Carriers can swap your profile remotely. If a carrier needs to update your IMSI or network settings (rare, but it happens after mergers and roaming-partner changes) they can push a new profile over the air. The standard for this is called RSP (Remote SIM Provisioning), defined by the GSMA.

The radio side of the equation doesn't change at all. To a tower, your phone with an eSIM looks identical to your phone with a physical SIM. Same authentication exchange, same IMSI in the request, same encryption keys. The only difference is where those credentials live.

9 · What this means for travelers

With that in place, I can explain what international roaming is. When you land in another country and your phone still works, here is what happens under the hood:

  1. Your phone scans for towers and finds ones broadcasting on local frequencies. The strongest signal usually belongs to a partner of your home carrier.
  2. It tries to register on that tower using the IMSI in your SIM (or eSIM profile). The local network sees a foreign IMSI and asks itself: "Do I have a roaming agreement with this home carrier?"
  3. If yes, the local network calls home. It uses SS7 or Diameter to query your home HSS: "Is this subscriber real, are they allowed to roam, and what authentication keys do I use?"
  4. Your home network authorises the visit. The local tower now treats you as a guest subscriber. Calls inbound to your number still get routed to your home network first, then forwarded over the international signaling backbone to wherever you currently are.
  5. You get billed by your home carrier. The visited network bills your home network at wholesale rates. Your home carrier marks it up and bills you at retail. That markup is the entire roaming-fee industry.

This is why traditional roaming is expensive: every call, every megabyte, every text routes back through your home carrier first. The signaling has to traverse two cores and an international backbone before it can connect.

A global eSIM like Ringo works on the same machinery (same SS7 lookups, same HSS authentication, same authentication keys), just with a different commercial structure underneath. Instead of being a "guest" everywhere you go, your line is registered as a local-equivalent subscriber in every region Ringo operates, so calls and data terminate without the home-leg detour. Your number still resolves through the global portability database. The radio link still uses the local tower. The signaling still uses Diameter or HTTP/2. The only thing that's different is the bill.

That is all of it. I found no secret protocol, no special hardware in your phone and no proprietary network. Ringo plugs into the same telco infrastructure your current carrier uses. Ringo structured the wholesale agreements to span 180+ countries instead of one.

10 · Frequently asked questions

Why does my phone ring a few seconds after the caller hears it ring?+
The "ringback" you hear is generated by the calling carrier as soon as it forwards the signaling to the destination network. Your phone only starts ringing once the destination tower successfully pages it, which involves a few more handshake messages. The 1 to 3 second gap is normal.
If I call my friend in the next room, does the signal actually go through the network?+
Yes. Even if you're both on the same Wi-Fi sitting on the same sofa, the call goes phone → tower → core → signaling backbone → core → tower → phone. Phones don't do peer-to-peer voice (except over apps like FaceTime, which do route P2P when they can). Cell phone calls always go via the network.
What is an IMSI and how is it different from a phone number?+
Your IMSI (International Mobile Subscriber Identity) is the subscriber identifier stored on your SIM: a 15-digit number that the network uses to authenticate you. It's separate from your phone number, which is a public-facing routing address. The HSS maps one to the other. You never see your IMSI; carriers do.
Is SS7 really still in use? Isn't it old?+
Yes, and yes. SS7 dates to the 1970s but underpins virtually all 2G/3G interconnect globally, and is still used as a fallback in many 4G/5G roaming flows. The industry is migrating to Diameter and 5G's HTTP-based signaling, but until every legacy network in every country is retired, SS7 gateways stay. I expect that migration to take another decade.
Can the network see what I'm saying on a call?+
On 2G, voice was lightly encrypted and known to be breakable. On 3G and beyond, the radio link is strongly encrypted between your phone and the tower, then re-encrypted between the tower and the core. The carrier can technically intercept calls at the core (this is how lawful intercept works) but no one outside the carrier (including the visited network when you're roaming) has access to the audio.
How does an eSIM "know" which network to connect to?+
It doesn't. The eSIM holds your subscriber identity. Network selection is done by your phone's modem, which scans for towers, ranks them by signal strength and operator preference, and picks one. The eSIM provides the credentials used to authenticate once a candidate tower is chosen.
Why is 5G sometimes slower than 4G?+
Because "5G" can mean two very different radios, as I read it. Low-band 5G uses similar frequencies to 4G and gets similar speeds. Millimeter-wave 5G is where you see gigabit speeds, but it only works at line-of-sight to a small cell and is rare outside dense urban areas. Many "5G" connections are really NSA-mode 5G that still uses a 4G core, so the speed gains are modest.
Do calls still use SS7 if both phones are on the same 5G network?+
No. If both endpoints are on a 5G network operated by the same carrier (or two 5G partners that have fully migrated), the signaling is HTTP/2-based and the voice is VoNR over IP. SS7 only enters when the call has to interconnect with a legacy network somewhere in the chain, which is still extremely common for international calls.
What's a "fake cell tower" or IMSI catcher?+
A device that pretends to be a cell tower so nearby phones connect to it. It works by exploiting the lack of mutual authentication in 2G (your phone authenticates to the network, but not the other way around). 3G and later fix this with mutual authentication, which is why properly configured 4G/5G phones with 2G disabled are much harder to attack this way.

11 · Sources

These are the sources I leaned on for this piece. Telecoms standards evolve, so check the originals for the latest.

  • 3GPP: specifications portal. The standards body that defines every generation of mobile network (2G/GSM through 5G NR). The actual specs for the radio interface, the core network, and the signaling protocols. 3gpp.org/specifications-technologies
  • GSMA: eSIM specifications. The industry body that publishes the Remote SIM Provisioning (RSP) standard, eUICC architecture, and SM-DP+ requirements. Everything an eSIM has to do, formally written down. gsma.com/esim
  • ITU-T E.164. The international standard that defines how phone numbers work: the format, the country codes, the maximum length. Every dialled number on Earth conforms to this recommendation. itu.int/rec/T-REC-E.164
  • FCC: Local Number Portability. The US regulator's plain-English primer on how LNP works, plus the historical record of when wireless porting became mandatory (2003). fcc.gov · WLNP
  • Ofcom: UK porting guidance. The UK regulator's rules on number portability, PAC codes, and the timelines carriers are required to meet. Useful as a contrast with the US system. ofcom.org.uk
  • ENISA: signaling security threat landscape. The EU cybersecurity agency's reports on SS7 and Diameter vulnerabilities, with the mitigations expected of carriers. The cleanest non-vendor overview of why signaling security matters. enisa.europa.eu
  • Android Open Source Project: eSIM overview. Google's developer documentation on how Android implements eSIM, the eUICC interface, and carrier-app integration. Pairs well with the GSMA RSP spec. source.android.com · eSIM overview
  • Apple: eSIM developer documentation. Apple's published guidance on iPhone eSIM activation flows, profile management, and carrier interaction. The reference for anyone building against the iOS side of the eSIM ecosystem. developer.apple.com